Chemica Duoflex
Flex Film: Polyurethane, 480 µ
Chemica DUOFLEX Effect Flex Film
The Chemica DUOFLEX is a two coloured flex film for garment lettering with an outline in a contrast colour. The lower part of this two layered film increases it’s volume slightly when pressing which creates the outline and can, after pressing or washing cause the thin surface film to become uneven or slightly creased.
The film has a thickness of approx. 480 µ, after pressing 600 µ.
Instructions
We recommend a flock knife for cutting this film.
Prepress garment for 2 - 3 seconds at full temperature before positioning the film. Wash inside out, wait 24 hours after the heat transfer.
![]() 165 °C |
![]() 20 sec. |
![]() Approx. 3 bar |
![]() Cold |
![]() No |
![]() 40 °C |
![]() No |
These instructions are based on the values obtained from practical experience. No responsibility is taken for the correctness of this information. We strongly recommend the evaluation on test material.
Colours shown may deviate from the original colours and are for illustration purposes only!