POLI-FLEX Dimension Flex Film
Flex Film: Polyurethane, 600 µ
POLI-FLEX DIMENSION Flex Film
POLI-FLEX DIMENSION is a high quality cast flex film with a matt surface finish and 600 µ thickness. POLI-FLEX DIMENSION flex film is ideal for attractive 3D transfers but it is not suitable for small lettering or fine detailed designs.
We recommend using a flock knife and cut the motive twice.
Instructions
Prepress garment for 2 - 3 seconds at full temperature before positioning the film. Wash inside out, wait 24 hours after the heat transfer.
![]() 160 °C |
![]() 25 sec. |
![]() 3 bar |
![]() Cold |
![]() No |
![]() 60 °C |
![]() No |
These instructions are based on the values obtained from practical experience. No responsibility is taken for the correctness of this information. We strongly recommend the evaluation on test material.