Printable 4015
Printable Flex Film: Polyurethane, 100 µ
POLI-FLEX PRINTABLE 4015 Solvent Flex
POLI-FLEX 4015 is a printable white semi-matt polyurethane flex film (100 µ) for garment lettering. The POLI-FLEX 4015 has excellent print and cut properties. POLI-FLEX 4015 printable solvent film has an adhesive PET liner which has advantages over a paper liner, especially when contour cutting. The film can be used with solvent and eco solvent inks.
Instructions
Print non-mirrored, let the print dry thoroughly (approx. 24 hours) before further processing. To transfer the print onto the textile we recommend the heat resistant application tape POLI-TACK 854. If transferring without application tape, cover your print with a siliconised paper whilst pressing.
Prepress garment for 2 - 3 seconds at full temperature before positioning the film. Wash inside out, wait 24 hours after the heat transfer.
 160 °C |
 15 sec. |
 2,5 - 3,0 bar |
 Warm |
 No |
 40 °C |
 No |
These instructions are based on the values obtained from practical experience. No responsibility is taken for the correctness of this information. We strongly recommend the evaluation on test material.
