Printable 4600

Printable Flex Film: Polyurethane, 160 µ

In stock
As low as €81.00
excl. 16% VAT excl. Shipping and packaging
Base Price: €6.48 / 1 m
Please register or login. You can buy products only after successful activation of your account.

POLI-TAPE Group

POLI-FLEX PRINTABLE 4600

The POLI-FLEX PRINTABLE 4600 is a white matt flex film suitable for printing using water based inks, both dye based and pigment. The ecologically proven polyurethane flex film is 160 µ thick and has a 137 g/m² siliconised paper liner for contour cutting using a vinyl cutter.

The POLI-FLEX PRINTABLE 4600 is also available with a polyester liner in A4 and A3, please see the POLI-FLEX PRINTABLE 4605.


Instructions

Print non-mirrored, let the print dry thoroughly (approx. 24 hours) before further processing. To transfer the print onto the textile we recommend the heat resistant application tape POLI-TACK 853. If transferring without application tape, cover your print with a siliconised paper whilst pressing.

Prepress garment for 2 - 3 seconds at full temperature before positioning the film. Wash inside out, wait 24 hours after the heat transfer.

Temperature
160 °C
 
Time
15 sec.
 
Pressure
2,5 -
3,0 bar
Remove Liner
Warm
 
Second Pressing
No
  
Washable at
60 °C
 
Dry Cleaning
No
 

These instructions are based on the values obtained from practical experience. No responsibility is taken for the correctness of this information. We strongly recommend the evaluation on test material.