We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Printable 4605 Sheets
Printable Flex Film: Polyurethane, 160 µ
POLI-FLEX PRINTABLE 4605
The POLI-FLEX PRINTABLE 4605 is a white matt flex film with a polyester liner and is suitable for printing with water based inks (dye and pigment). Due to the stable polyester liner the POLI-FLEX 4605 has excellent lay-flat properties needed for printing with desktop printers. The POLI-FLEX PRINTABLE 4605 is made of a 160 µ thick polyurethane film, is PVC-free and ecologically proven.
The POLI-FLEX PRINTABLE 4605 is also available on rolls with a 137 g/m² paper liner, please see the POLI-FLEX PRINTABLE 4600.
Instructions
Print non-mirrored, let the print dry thoroughly (approx. 24 hours) before further processing. To transfer the print onto the textile we recommend the heat resistant application tape POLI-TACK 854. If transferring without application tape, cover your print with a siliconised paper whilst pressing.
Prepress garment for 2 - 3 seconds at full temperature before positioning the film. Wash inside out, wait 24 hours after the heat transfer.
 160 °C |
 15 sec. |
 2,5 - 3,0 bar |
 Warm |
 No |
 60 °C |
 No |
These instructions are based on the values obtained from practical experience. No responsibility is taken for the correctness of this information. We strongly recommend the evaluation on test material.
