Printable 4625

Printable Flex Film: Polyurethane, 75 µ

Out of stock
excl. 16% VAT excl. Shipping and packaging

POLI-TAPE Group

POLI-FLEX PRINTABLE 4625

The POLI-FLEX PRINTABLE 4625 is a transparent, silk matt, printable flex film for white textiles. The POLI-FLEX PRINTABLE 4625 is printed with the image mirrored using solvent or eco solvent inks. The flex film is based on a cast, 75 µ polyurethane on a 137 g/m² silconised paper liner.


Instructions

Print mirrored, let the print dry thoroughly (approx. 24 hours) before further processing. Transfer with the original liner.

Prepress garment for 2 - 3 seconds at full temperature before positioning the film. Wash inside out, wait 24 hours after the heat transfer.

Temperature
160 °C
 
Time
15 sec.
 
Pressure
2,5 -
3,0 bar
Remove Liner
Warm
 
Second Pressing
No
  
Washable at
60 °C
 
Dry Cleaning
No
 

These instructions are based on the values obtained from practical experience. No responsibility is taken for the correctness of this information. We strongly recommend the evaluation on test material.