POLI-FLEX 4655
Printable Flex Film: Polyurethane, 75 µ
POLI-FLEX Printable 4655
The POLI-FLEX PRINTABLE 4655 is a transparent printable flex film for white textiles with a semi-matt finish. The POLI-FLEX PRINTABLE 4655 is printed with the image mirrored using latex, solvent or eco solvent inks. The flex film is based on a high quality, 75 µ polyurethane film with a non-sticky polyester liner and is washable up to 60 °C.
Instructions
Print mirrored on the back side, let the print dry thoroughly (approx. 24 hours) before further processing. No application tape necessary.
Prepress garment for 2 - 3 seconds at full temperature before positioning the film. Wash inside out, wait 24 hours after the heat transfer.
 160 °C |
 15 sec. |
 2,5 - 3,0 bar |
 Warm |
 No |
 60 °C |
 No |
These instructions are based on the values obtained from practical experience. No responsibility is taken for the correctness of this information. We strongly recommend the evaluation on test material.
