POLI-FLEX Printable 4675

POLI-FLEX PRINTABLE 4675

POLI-FLEX PRINTABLE 4675 is a printable polyester fabric for garment lettering. The POLI-FLEX PRINTABLE 4675 is suitable for printing with sublimation inks, due to the thick siliconised liner the POLI-FLEX PRINTABLE 4675 can be contour cut after printing.

The printed and contour cut polyester textile can be easily weeded. The printed graphics have brilliant and vibrant colours. We recommend a stitch-trimming the border of the finished patch to avoid the edges fraying.

POLI-FLEX PRINTABLE 4675 is 200 µ thick and washable up to 90 °C which makes it a great option for manufacturing patches used on work-wear.

Instructions

Print the sublimation paper with a mirrored image. The sublimation paper is then laid face down on the POLI-FLEX PRINTABLE 4675 and pressed onto it according to the usage guidelines of the sublimation paper.

The printed graphic should be left to cool for at least 4 hours before processing further. The garment is then pressed for 2 - 3 seconds and the POLI-FLEX PRINTABLE 4675 is transferred using the parameters shown below. We recommend the POLI-TACK 853 application tape for transferring multi-part graphics. If transferring without application tape, cover your print with a siliconised paper whilst pressing.

160 °C

15 sec.

2,5 - 3,0 bar

Warm

No

90 °C

No

These instructions are based on the values obtained from practical experience. No responsibility is taken for the correctness of this information. We strongly recommend the evaluation on test material.