POLI-FLEX 4781 Reflex Silver 3M
Flex Film: Multiple Layer, 160 µ
POLI-FLEX 4781 REFLEX SILVER 3M Flex Film
POLI-FLEX REFLEX SILVER is a retro-reflective silver coloured flex film with approx. 160 µ for garment lettering on work wear, leisure wear and safety wear.
The film consists of metalized microscopic glass beads laminated to a dry heat-reactivating adhesive backing. POLI-FLEX® REFLEX SILVER is composed of wide-angle, exposed, retro-reflective lenses. The photometric values (min. retro-reflection values) conform to EN ISO 20471:2013.
Instructions
Prepress garment for 2 - 3 seconds at full temperature before positioning the film. Wash inside out, wait 24 hours after the heat transfer.
![]() 160 °C |
![]() 15 sec. |
![]() Approx. 3 bar |
![]() Warm |
![]() 2 sec. |
![]() 60 °C |
![]() No |
These instructions are based on the values obtained from practical experience. No responsibility is taken for the correctness of this information. We strongly recommend the evaluation on test material.