POLI-FLEX STRETCH Flex Film
Flex Film: Polyurethane, 100 µ
POLI-FLEX STRETCH Flex Film
POLI-FLEX STRETCH is a soft and stretchy PU-film with a matt surface specially designed for garment lettering on elastic materials such as sport and leisure wear. POLI-FLEX STRETCH can be applied to cotton, polyester and their blends as well as polyester / acrylic fabrics and is free of PVC and plasticisers.
The heat transfer film is 100 µ thick and can be cut with all good vinyl cutters such as the SummaCut range of vinyl cutters. The sticky liner is peeled when still warm.
Instructions
Prepress garment for 2 - 3 seconds at full temperature before positioning the film. Wash inside out, wait 24 hours after the heat transfer.
![]() 160 °C |
![]() 15 sec. |
![]() Approx. 3 bar |
![]() Warm |
![]() 2 sec. |
![]() 80 °C |
![]() Yes |
These instructions are based on the values obtained from practical experience. No responsibility is taken for the correctness of this information. We strongly recommend the evaluation on test material.
Colours shown may deviate from the original colours and are for illustration purposes only!