Turbo Print 4036
Printable Flex Film: Polyurethane, 100 µ
POLI-FLEX TURBO PRINT 4036
TURBO PRINT 4036 MATT - The POLI-FLEX TURBO PRINT MATT 4036 is a printable PU flex with a white matt surface and a thickness of 100 µ. The TURBO PRINT is suitable for the usage on cotton, polyester (non re-sublimating) and their blends. The TURBO PRINT 4036 ist printable with eco solvent, solvent and latex inks.
Instructions
Print non-mirrored, let the print dry thoroughly (approx. 24 hours) before further processing. To transfer the print onto the textile we recommend the heat resistant application tape POLI-TACK 854. If transferring without application tape, cover your print with a siliconised paper whilst pressing.
Prepress garment for 2 - 3 seconds at full temperature before positioning the film. Wash inside out, wait 24 hours after the heat transfer.
![]() 130 °C - 160 °C |
![]() 3 -5 sec. |
![]() 2,5 - 3 bar |
![]() Warm |
![]() No |
![]() 60 °C |
![]() No |
* Transfer with 130 °C for 5 seconds, 150 °C for 4 seconds or 160 °C for 3 seconds.
These instructions are based on the values obtained from practical experience. No responsibility is taken for the correctness of this information. We strongly recommend the evaluation on test material.