We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Ultimate Print 4035 Nylon
Printable Flex Film: Polyurethane, 100 µ
POLI-FLEX ULTIMATE PRINT NYLON 4035 Solvent Flex
POLI-FLEX ULTIMATE PRINT NYLON 4035 is a white opaque, thin polyurethane film with only 100 µ thickness. The digital flex has been especially developed for printed garment lettering on textiles made of nylon and has a non-sticky polyester liner which is a great advantage over a paper liner.
The POLI-FLEX ULTIMATE PRINT NYLON 4035 can be printed using solvent or eco solvent inks.
Instructions
Print non-mirrored, let the print dry thoroughly (approx. 24 hours) before further processing. To transfer the print onto the textile we recommend the heat resistant application tape POLI-TACK 854 or POLI-TACK 853. If transferring without application tape, cover your print with a siliconised paper whilst pressing.
Prepress garment for 2 - 3 seconds at full temperature before positioning the film. Wash inside out, wait 24 hours after the heat transfer.
 150 °C |
 4 sec. |
 Approx. 2 bar |
 Tepid |
 10 sec. |
 40 °C |
 No |
These instructions are based on the values obtained from practical experience. No responsibility is taken for the correctness of this information. We strongly recommend the evaluation on test material.
