Ultimate Print Soft 4031

POLI-FLEX ULTIMATE PRINT SOFT 4031

POLI-FLEX ULTIMATE PRINT SOFT 4031 is a white opaque, thin printable PU flex film with 80 µ, excellent cutting properties and a shiny glossy finish. POLI-FLEX 4031 printable digital flex film has a non-adhesive PET liner which has advantages over a paper liner, especially when contour cutting. The film can be used with solvent and eco-solvent inks.

Instructions

Print non-mirrored, let the print dry thoroughly (approx. 24 hours) before further processing. To transfer the print onto the textile we recommend the heat resistant application tape POLI-TACK 854. If transferring without application tape, cover your print with a siliconised paper whilst pressing.

Prepress garment for 2 - 3 seconds at full temperature before positioning the film. Wash inside out, wait 24 hours after the heat transfer.

160 °C

15 sec.

2,5 - 3,0 bar

Warm

No

80 °C

No

These instructions are based on the values obtained from practical experience. No responsibility is taken for the correctness of this information. We strongly recommend the evaluation on test material.