Ultimate Print Soft 4034

Printable Flex Film: Polyurethane, 50 µ

In stock
As low as €55.00
excl. 16% VAT excl. Shipping and packaging
Grundpreis: €4.40 / 1 m
Please register or login. You can buy products only after successful activation of your account.

POLI-TAPE Group

POLI-FLEX ULTIMATE PRINT SOFT 4034

The POLI-FLEX PRINTABLE 4034 is a transparent printable flex film for white textiles with a semi-matt finish. The POLI-FLEX PRINTABLE 4034 is printed with the image mirrored using latex, solvent or eco solvent inks. The flex film is based on a high quality cast, 50 µ polyurethane film with a non-sticky polyester liner and is washable up to 40 °C.


Instructions

Print mirrored on the back side, let the print dry thoroughly (approx. 24 hours) before further processing. No application tape necessary. 

Prepress garment for 2 - 3 seconds at full temperature before positioning the film. Wash inside out, wait 24 hours after the heat transfer.

Temperature
160 °C
 
Time
15 sec.
 
Pressure
2,5 -
3,0 bar
Remove Liner
Warm
 
Second Pressing
No
 
Washable at
40 °C
 
Dry Cleaning
No
 

These instructions are based on the values obtained from practical experience. No responsibility is taken for the correctness of this information. We strongly recommend the evaluation on test material.