SUBLI-FLOCK 5901
Sublimation Flock Film
SUBLI-FLOCK 5901
SUBLI-FLOCK 5901 – a white polyester flock film for garment lettering suitable for printing with sublimation inks using a sublimation paper. Due to the whiteness and density of the POLI-FLOCK 5901 the printed graphics are brilliant in colour. The SUBLI-FLOCK 5901 has a very good resistance to yellowing and is suitable for transferring onto cotton and most polyester textiles which do not tend to resublimate.
Usage Guidance
Print your sublimation paper mirroring the image. After printing, leave the graphic to cool for 4 hours before processing. Lay the sublimation paper face down on the SUBLI-FLOCK 5901 and press onto the textile, mind the usage guidelines of the sublimation paper. Prepress the garment for 2 - 3 seconds before applying the print following the below guidelines:
![]() 160 °C |
![]() 15 sec. |
![]() 2,5 - 3,0 bar |
![]() Warm |
![]() No |
![]() 60 °C |
![]() No |
These instructions are based on the values obtained from practical experience. No responsibility is taken for the correctness of this information. We strongly recommend the evaluation on test material.