Colorprint PU Extra SP Matt
Printable Flex Film: Polyurethane, 70 µ
Siser Colorprint PU Extra SP Matt
The Siser Colorprint PU Extra SP is a PU flex film suitable for applications on difficult materials such as nylon, sport bags and leather. The Siser Colorprint PU Extra SP is only 70 µ thick and suitable for printing with Solvent, Eco Solvent or HP Latex inks. Please check the manufacturer’s printer and ink compatability list before printing.
Siser Colorprint PU Extra SP is available in matt and glossy.
Instructions
Print non-mirrored, let the print dry thoroughly (approx. 24 hours) before further processing. To transfer the print onto the textile we recommend a heat resistant application tape Siser T.T.D. If transferring without application tape, cover your print with a siliconised paper whilst pressing.
Prepress garment for 2 - 3 seconds at full temperature before positioning the film. Wash inside out, wait 24 hours after the heat transfer.
![]() 155 °C |
![]() 15 sec. |
![]() Approx. 3 - 4 bar |
![]() Warm |
![]() No |
![]() 40 °C |
![]() No |
These instructions are based on the values obtained from practical experience. No responsibility is taken for the correctness of this information. We strongly recommend the evaluation on test material.