Colorprint®

Printable Flex Film: PVC, 170 µ

In stock
As low as €63.48
excl. 16% VAT excl. Shipping and packaging
Grundpreis: €5.08 / 1 m
Please register or login. You can buy products only after successful activation of your account.

Siser

Siser Colorprint Solvent Flex

Siser Colorprint is a high quality printable heat transfer flex film with a glossy finish for brilliant and vibrant colours and high resolution graphics. Printable with solvent, eco-solvent and resin based thermal transfer printers. (Not for Truevis inks, please consult the manufacturers ink-compatability list). Suitable for usage on cotton, polyester and their blends.

The solvent flex film Siser Colorprint has a thickness of 170 µ and a non-sticky polyester carrier.


Instructions

Print non-mirrored, let the print dry thoroughly (approx. 24 hours) before further processing. To transfer the print onto the textile we recommend the heat resistant application tape Siser T.T.D. Advanced. If transferring without application tape, cover your print with a siliconised paper whilst pressing.

Prepress garment for 2 - 3 seconds at full temperature before positioning the film. Wash inside out, wait 24 hours after the heat transfer.

Temperature
150 °C
 
Time
15 sec.
 
Pressure
Approx.
3,5 bar
Remove Liner
Warm
 
Second Pressing
No
  /td>
Washable at
50 °C
 
Dry Cleaning
No
 

These instructions are based on the values obtained from practical experience. No responsibility is taken for the correctness of this information. We strongly recommend the evaluation on test material.