Siser Easy Subli
For Sublimation Inks
Siser Easy Subli
The Siser Easy Subli is a printable flex film suitable for direct printing with sublimation inks. The flex film with a thickness of 220 µ is printed directly without mirroring. Due to the different printer and ink types we strongly recommend testing before usage.
We recommend following printing parameters: Priority: Quality, Paper Type: High Gloss, Profile: Photo.
Instructions
Print non-mirrored, let the print dry thoroughly before further processing.
Prepress garment for 2 - 3 seconds at full temperature before positioning the film. To transfer the print onto the textile we recommend the heat resistant application tape Siser T.T.D. Special. If transferring without application tape, cover your print with a siliconised paper whilst pressing.
 155 °C |
 15 sec. |
 Approx. 3,5 bar |
 Warm |
 No |
 60 °C |
 No |
These instructions are based on the values obtained from practical experience. No responsibility is taken for the correctness of this information. We strongly recommend the evaluation on test material.
