Siser EasyPatterns
Design Flex Film - Please read the description!
Siser EasyPatterns Flex Film
The Siser EasyPatterns is available in many edge-to-edge pre-printed designs and has a average thickness of 90 µ. Application tape needed!
Please note! Colours may vary between batches. This is due to the manufacturing process and no reason for complaint.
Instructions
Do not mirror the design before cutting, use a heat resistant application tape to transfer the film onto the textile. We recommend Siser T.T.D Easy.
Prepress garment for 2 - 3 seconds at full temperature before positioning the film. Wash inside out, wait 24 hours after the heat transfer.
![]() 155 °C |
![]() 15 sec. |
![]() Approx. 3,5 bar |
![]() Warm |
![]() No |
![]() 40 °C |
![]() No |
These instructions are based on the values obtained from practical experience. No responsibility is taken for the correctness of this information. We strongly recommend the evaluation on test material.
Colours shown may deviate from the original colours and are for illustration purposes only!