Siser Foil
Flex Film: Polyurethane, 80 µ
Siser Foil Effect Flex Film
The Siser Foil flex film is a high quality PU-flex with an 80 µ thickness. The Siser Foil is ideal for applications where a nice metallic effect is desired on cotton, polyester and their blends.
Please note that the mirror surface of the Siser Foil will become matter after pressing and has a lower abrasion resistance.
OEKO-TEX Standard 100 certified.
Instructions
Prepress garment for 2 - 3 seconds at full temperature before positioning the film. Wash inside out, wait 24 hours after the heat transfer.
![]() 135 °C |
![]() 15 sec. |
![]() Approx. 3,5 bar |
![]() Warm |
![]() No |
![]() 30 °C |
![]() No |
These instructions are based on the values obtained from practical experience. No responsibility is taken for the correctness of this information. We strongly recommend the evaluation on test material.