Siser Holographic Flexfolie
Flex Film: Polyester, 210 µ
Siser Holographic Flex Film
The Siser Holographic is a 210 µ polyester flex film with a metallic holographic effect. The adhesive carrier is peeled when cold.
Please note that polyester flex films are not suitable for small or fine details and are not durable for a large amount of washing cycles.
Instructions
Prepress garment for 2 - 3 seconds at full temperature before positioning the film. Wash inside out, wait 24 hours after the heat transfer.
![]() 160 °C |
![]() 15 - 20 sec. |
![]() Approx. 3 bar |
![]() Cold |
![]() No |
![]() 40 °C |
![]() No |
These instructions are based on the values obtained from practical experience. No responsibility is taken for the correctness of this information. We strongly recommend the evaluation on test material.
Colours shown may deviate from the original colours and are for illustration purposes only!