Jetflock Solvent
Printable Flock Film: 450 µ
Siser Jetflock Solvent
The Siser Jetflock Solvent is a high white printable digital flock for printing with solvent and eco-solvent inks. (Please consult the manufacturers ink-compatability list). The polyester flock film has a paper liner, is 450 µ thick and has a high opacity.
Instructions
Print non-mirrored, let the print dry thoroughly (approx. 24 hours) before further processing. Cover your print with a siliconised paper whilst pressing.
Prepress garment for 2 - 3 seconds at full temperature before positioning the film. Wash inside out, wait 24 hours after the heat transfer.
![]() 180 °C |
![]() 15 sec. |
![]() Approx. 3,5 bar |
![]() --- |
![]() No |
![]() 60 °C |
![]() No |
These instructions are based on the values obtained from practical experience. No responsibility is taken for the correctness of this information. We strongly recommend the evaluation on test material.