Siser P.S. Adhesive
Hotmelt
Siser P.S. Adhesive (Siser EasyWeed Adhesive)
Siser EasyWeed Adhesive - The Siser P.S. Adhesive is a thermo-adhesive film with a sticky carrier suitable for use with a vinyl cutter. The Siser P.S Adhesive is used for the application of hot stamping films to textile substrates and has a pink colured protective film which is removed before processing.
Instructions
Prepress garment for 2 - 3 seconds at full temperature before positioning the film. Wash inside out, wait 24 hours after the heat transfer.
![]() 130 °C - 150 °C |
![]() 5 sec. |
![]() Approx. 3 - 4 bar |
![]() Warm |
![]() 40 °C |
![]() No |
These instructions are based on the values obtained from practical experience. No responsiblity is taken for the correctness of this information. We strongly recommend the evaluation on test material.