Soft Print Color Gloss
Printable Flex Film: Polyurethane, 45 µ
Siser Soft Print Color Gloss
The Siser Soft Print Color is a very thin printable PU flex film with a thickness of only 45 µ. The Siser Soft Print Color has excellent printing properties and is suitable for printing with solvent and eco solvent inks. Please check the manufacturer’s printer and ink-compatibility list before printing. Available with matt or glossy surface.
Oeko-Tex 100 class I certified.
Instructions
Print non-mirrored, let the print dry thoroughly (approx. 24 hours) before further processing. To transfer the print onto the textile we recommend the heat resistant application tape Siser T.T.D. Easy. If transferring without application tape, cover your print with a siliconised paper whilst pressing.
Prepress garment for 2 - 3 seconds at full temperature before positioning the film. Wash inside out, wait 24 hours after the heat transfer.
![]() 155 °C |
![]() 15 sec. |
![]() Approx. 3 - 4 bar |
![]() Warm |
![]() No |
![]() 40 °C |
![]() No |
These instructions are based on the values obtained from practical experience. No responsibility is taken for the correctness of this information. We strongly recommend the evaluation on test material.