Sublithin™ Matt LT
Printable Flex Film: Polyurethane, 110 µ
Siser Sublithin™ Matt LT
Siser Sublithin™ Matt LT is a printable digital flex film with a blockout layer for printed garphics and lettering on garments which tend to resublimate. The Siser Sublithin™ Matt LT is a white matt PU Flex film and is suitable for printing with solvent and eco solvent printers.
The Siser Sublithin™ Matt LT is for transferring onto nylon and polyester textiles.
Instructions
Print non-mirrored, let the print dry thoroughly (approx. 24 hours) before further processing. To transfer the print onto the textile we recommend the heat resistant application tape Siser T.T.D. Easy. If transferring without application tape, cover your print with a siliconised paper whilst pressing.
Prepress garment for 2 - 3 seconds at full temperature before positioning the film. Wash inside out, wait 24 hours after the heat transfer.
Please note that the blockout layer in all blockout flex films can be damaged or destroyed by pressing the film at too high temperature or by numerous pressing.
![]() 130 °C |
![]() 15 sec. |
![]() Approx. 3,5 bar |
![]() Warm |
![]() No |
![]() 30 °C |
![]() No |
These instructions are based on the values obtained from practical experience. No responsibility is taken for the correctness of this information. We strongly recommend the evaluation on test material.