MDF Key Ring Square
Approx. 50 x 50 mm
Subli-Print® Square MDF Key Ring
Sublimation key ring made of high quality MDF with 3 mm thickness for double sided printing. The Subli-Print® MDF key ring has a protective film on the print surface which should be removed before printing. The key ring is assembled after printing.
- High quality MDF, 3 mm thick
- Printable area approx. 50 x 50 mm
- Shiny print surface with protective film
- Printable on both sides
Instructions
How to print on the MDF using TexPrint®R Sublimation Paper:
![]() mirrored |
![]() 185 °C |
![]() 55 sec. |
![]() Approx. 3 bar |
![]() Hot |
These instructions are based on the values obtained from practical experience. No responsibility is taken for the correctness of this information. We strongly recommend the evaluation on test material.