MDF Sign Three Hearts

Subli-Print® MDF Sign Three Hearts

The Subli-Print® MDF-Sign Three Hearts is ideal for decorative signs and home decoration. The approx. 5 mm thick MDF sign is covered with a protective film which is removed before printing. The three hearts can be fixed with double sided tape (not included) to the approx. 28 x 10 cm sized sign after printing. Prepress rear side for 10 seconds before transferring as below.

Instructions

How to print on the MDF using TexPrint®R Sublimation Paper:

Print  mirrored

180 °C

50 sec.

Approx. 1,5 bar

Hot

These instructions are based on the values obtained from practical experience. No responsibility is taken for the correctness of this information. We strongly recommend the evaluation on test material.