Tubitherm® 5001 Flockfolie
Flock Film: Viscose, 0,5 mm
TUBITHERM® 5001 Blockout Flock Film
The TUBITHERM® 5001 Blockout is a white heat transfer rayon flock with a blockout intermediate layer, especially for textiles made of polyester.
Material: Viscose, flock length 0,5 mm.
Instructions
Prepress garment for 1 second at full temperature before positioning the film. Wash inside out, wait 24 hours after the heat transfer.
Please note that the blockout layer in all blockout flex films can be damaged or destroyed by pressing the film at too high temperature or by numerous pressing.
![]() 160 °C |
![]() 15 sec. |
![]() Approx. 2 bar |
![]() Warm |
![]() 2 sec. |
![]() 40 °C |
![]() No |
These instructions are based on the values obtained from practical experience. No responsibility is taken for the correctness of this information. We strongly recommend the evaluation on test material.