POLI-FLEX® Image Flex Film
Design flex film
Product information
POLI-FLEX® Image Flex Film
Flex films from the POLI-FLEX® IMAGE series give clothing a special individuality, each garment becomes unique.
POLI-FLEX® Brilliant (high-gloss) and POLI-FLEX® Starflex (holographic) are PET films with 100 respectively 110 µ. A knife pressure of approx. 200 g is required for cutting and the film is not suitable for lettering under 2 cm. Hand washing is recommended due to limited washing and abrasion resistance.
Instructions
The following information is intended as a guide and may vary due to tolerances (material properties, blade wear, etc.). A test cut is required at each roll change and wash tests are recommended.
Pre-press at full press temperature for 2-3 seconds and wash inside out at least 24 hours after pressing.
| Mirror subject | Yes |
|---|---|
| Pressing temperature | 160 °C |
| Pressing time | 15 seconds |
| Contact pressure | Medium, 2,5 - 3,5 Bar |
| Pull off the backing material | Warm |
| Washable up to | 80 °C, no softener, do not tumble dry |
| Knife / Tool | 45° | Cricut: Premium Fine Point | Cameo: Autoblade | Juliet: 45° |
| Knife pressure | 80 g | Cricut: - | Cameo: 6 | Juliet: 5-10 |
| Preset | Cricut: Heat Transfer (Non-Cricut) | Cameo: Heat Transfer Smooth |
Always carry out application tests on the original material.