POLI-TAPE Solvent-Flock 5905
Solvent Flock
Product information
POLI-TAPE® Solvent-Flock 5905
Solvent-Flock 5905 is a flock film made of viscose with a material thickness of approx. 500 µ which can be printed directly with solvent and eco-solvent inks. Due to the special fibre impregnation, beautiful printing results with brilliant colours are achieved.
Solvent-Flock 5905 is transferred without a transfer tape and is therefore only suitable for patches and for continuous motifs. Cover with silicone paper when pressing.
Instructions
The following information is intended as a guide and may vary due to tolerances (material properties, blade wear, etc.). A test cut is required at each roll change and wash tests are recommended.
Pre-press at full press temperature for 2-3 seconds and wash inside out at least 24 hours after pressing.
| Mirror subject | No |
|---|---|
| Pressing temperature | 160 °C |
| Pressing time | 15 seconds |
| Contact pressure | Medium, 2,5 - 3,0 Bar |
| Washable up to | 60 °C, no softener, do not tumble dry |
| Notice | Print non-mirrored, let the print dry thoroughly (approx. 24 hours) before further processing. Cover your print with a siliconised paper whilst pressing. |
Always carry out application tests on the original material.