Product information


POLI-TAPE® Subli-Flock 5901

POLI-TAPE® Subli-Flock 5901 Subli-Flock 5901 is a white polyester flock for sublimation printing, the designs are transferred with  transfer paper.

Due to the dense flocking, a print result with strong and brilliant colours is achieved. Subli-Flock 5901 has very good resistance to yellowing and is suitable for cotton and most polyester and blends that do not tend to resublimate.


The following information is intended as a guide and may vary due to tolerances (material properties, blade wear, etc.). A test cut is required at each roll change and wash tests are recommended.
Pre-press at full press temperature for 2-3 seconds and wash inside out at least 24 hours after pressing.

Mirror subject No
Pressing temperature 160 °C
Pressing time 15 seconds
Contact pressure Medium, 2,5 - 3,0 Bar
Washable up to 60 °C, no softener, do not tumble dry
Notice Print the mirrored design with sublimation inks on a suitable sublimation paper, e.g. TexPrint®R, and transfer the print onto the sublimation flock. Allow the printed flock film to cool for at least 4 hours before further processing.

Always carry out application tests on the original material.