Siser® P.S. Lumen Flex Film
Sheets 210 x 300 mm
Product number:
PS LUMEN FORMAT
Product information
Siser® P.S. Lumen Flex Film
The Siser® P.S. Lumen is a PL film (photoluminescent), which stores light in brightness and emits green light in darkness. The colour of Siser® P.S. Lumen is white in bright light.
The film has an average thickness of only 100 µ, but is not suitable for small fonts or fine details.
Instructions
The following information is intended as a guide and may vary due to tolerances (material properties, blade wear, etc.). A test cut is required at each roll change and wash tests are recommended.
Pre-press at full press temperature for 2-3 seconds and wash inside out at least 24 hours after pressing.
| Mirror subject | Yes |
|---|---|
| Pressing temperature | 150 °C |
| Pressing time | 15 seconds |
| Contact pressure | Medium, 2,5 - 3,5 Bar |
| Pull off the backing material | Warm | cold |
| Washable up to | 40 °C, no softener, do not tumble dry |
| Knife / Tool | 45° | Cricut: Premium Fine Point | Cameo: Autoblade | Juliet: 45° |
| Knife pressure | 90 g | Cricut: - | Cameo: 6 | Juliet 5-10 |
| Preset | Cricut: Heat Transfer (Non-Cricut) | Cameo: Heat Transfer Smooth |
Always carry out application tests on the original material.