Subli-Print® Tea Light Holder / Glass Tumbler
Each mug is packed in its own transport box.
Product number:
SUBLI-PRINT TEL
Product information
Subli-Print® Tea Light Holder / Glass Tumbler
Subli-Print® tea light glasses with a beautiful satin finish for tea lights, maxi tea lights up to 56 mm in diameter and small pillar candles.
The tea light glasses can also be used as drinking glasses. The glasses are approximately 90 mm high, slightly conical and have a diameter of approximately 75 mm at the bottom and 80 mm at the top.
Instructions
The following information is intended as a guide and may vary due to tolerances (material properties, sublimation inks and paper, substrate and ambient temperature, etc.). We recommend storing the items to be sublimated at room temperature for at least 24 hours before processing.
| Mirror subject | Yes |
|---|---|
| Pressing temperature | 200 °C |
| Pressing time | 200 seconds |
| Contact pressure | Medium, 2,5 - 3,0 Bar |
Always carry out application tests on the original material.