Product information

POLI-TAPE

POLI-FLEX® TURBO® Bright Flex Film

The bright colours from the POLI-FLEX® TURBO® series have an elegant metallic sheen and are ideal for high quality lettering on cotton, polyester (non-resublimating) and blended fabrics.

POLI-FLEX® TURBO® is a high quality 95 µ PU flex film with a very short pressing time, making it suitable for heat sensitive fabrics.

Instructions

The following information is intended as a guide and may vary due to tolerances (material properties, blade wear, etc.). A test cut is required at each roll change and wash tests are recommended.

Pre-press at full press temperature for 2-3 seconds and wash inside out at least 24 hours after pressing.

Mirror subject Ja
Pressing temperature 130 °C / 150 °C / 160 °C
Pressing time 5 seconds / 4 seconds / 3 seconds
Contact pressure Medium, 2,5 - 3,5 Bar
Pull off the backing material Hot
Washable up to 60 °C, no softener, do not tumble dry
Knife / Tool 45° | Cricut: Premium Fine Point | Cameo: Autoblade | Juliet: 45°
Knife pressure 80 g | Cricut: - | Cameo: 6 | Juliet: 5-10
Preset Cricut: Heat Transfer (Non-Cricut) | Cameo: Heat Transfer Smooth
Notice Not for multi-layer application.

Always carry out application tests on the original material.