POLI-FLEX Turbo

Flex Film: Polyurethane, 95 µ

In stock
As low as €6.25
excl. 16% VAT excl. Shipping and packaging
Grundpreis: €4.17 / 1 m
Please register or login. You can buy products only after successful activation of your account.

POLI-TAPE Group

POLI-FLEX TURBO Flex Film

POLI-FLEX TURBO is a high quality flex film suitable for applications which need an especially short transfer time. The POLI-FLEX TURBO can be applied to polyester (non-resublimating), cotton and many textile blends such as polyester / cotton mixes. Especially when a short transfer time is important, the POLI-FLEX TURBO is the right choice for example on delicate materials or when speed-pressing is required.

The POLI-FLEX TURBO is easy to cut on all quality brand cutters such as Summa, Roland, Mimaki and Graphtec. We recommend using a standard knife with 35 to 45 °. POLI-FLEX TURBO is not suitable for usage on textiles which have been dyed using sublimation pigments.

Material: Polyurethane, 95 µ. 


POLI-FLEX TURBO OEKO-TEX

Instructions

Prepress garment for 2 - 3 seconds at full temperature before positioning the film. Wash inside out, wait 24 hours after the heat transfer.

Temperature
130 °C 
(150 °C)
Time
5 sec.
(4 sec.)
Pressure
2,5 -
3,0 bar 
Remove Liner
Warm*
 
Second Pressing
No
 
Washable at
60 °C 
 
Dry Cleaning
Yes
 

* The liner of the colours 4903, 4940 - 4944 and 4987 should be removed lukewarm.

These instructions are based on the values obtained from practical experience. No responsibility is taken for the correctness of this information. We strongly recommend the evaluation on test material.


Colours shown may deviate from the original colours and are for illustration purposes only!