Siser EasyReflective FR HTV
Reflective Heat Transfer Vinyl – Flame Retardant
- Sold by the metre – ordered length supplied in one continuous roll
- Flame-retardant & highly reflective heat transfer vinyl
- Developed for protective clothing
Product information
When Visibility and Safety Matter: Siser EasyReflective Flame Retardant
For protective and workwear garments, a standard reflective heat transfer vinyl is not always sufficient. Siser EasyReflective Flame Retardant Silver has been specifically developed for applications where high visibility needs to be combined with requirements for flame, heat and workplace protection.
Tested for Demanding Protective Applications
EasyReflective Flame Retardant Silver meets the requirements of UNI EN ISO 20471:2017 for high-visibility warning clothing as well as EN 496:2020 for protective clothing for firefighters. It also complies with EN ISO 11611:2015 for protective clothing used in welding and allied processes, EN ISO 11612:2015 for protection against heat and flame, and EN ISO 14116:2015 for clothing and materials with limited flame spread.
High Reflectivity for Improved Visibility
Its highly reflective surface improves visibility in darkness and poor lighting conditions. This makes it particularly suitable for workwear, firefighters’ clothing, welding protective clothing and other safety-critical textile applications.
A Solution for Visibility and Flame Protection
With Siser EasyReflective Flame Retardant Silver, you get a specialist heat transfer vinyl that combines reflective performance with heat and flame protection requirements, making it suitable for demanding applications in industry, trades and occupational safety.
Instructions
The following information is intended as a guide and may vary due to tolerances (material properties, blade wear, etc.). A test cut is required at each roll change and wash tests are recommended.
Pre-press at full press temperature for 2-3 seconds and wash inside out at least 24 hours after pressing.
| Mirror subject | Yes |
|---|---|
| Pressing temperature | 150 °C |
| Pressing time | 15 seconds |
| Contact pressure | Medium, 2,5 - 3,0 Bar |
| Pull off the backing material | Warm | cold |
| Washable up to | 40 °C, no softener, do not tumble dry,. wash inside out |
| Knife / Tool | 45° | Cricut: Premium Fine Point | Cameo: Autoblade | Juliet: 45° |
| Knife pressure | 100 g | Cricut: - | Cameo: 6 | Juliet: 5-10 |
| Preset | Cricut: Heat Transfer (Non-Cricut) | Cameo: Heat Transfer Smooth |
Always carry out application tests on the original material.