Siser P.S. Perfor Flex Film
Perforated flex film
Product information
Siser® P.S. Perfor Flexfolie
The Siser® P.S. Perfor flex film is perforated across its entire surface, ensuring high breathability of the textile. The fine hole pattern also allows for unique decorative effects, giving your designs a sporty and dynamic look.
This polyurethane flex film has a material thickness of approx. 90 microns and features a pressure-sensitive carrier for easy and precise positioning. With wash resistance up to 60°C, P.S. Perfor is ideal for sportswear. When combined with other flex or flock films, it enables striking contrasts and creative special effects.
Instructions
The following information is intended as a guide and may vary due to tolerances (material properties, blade wear, etc.). A test cut is required at each roll change and wash tests are recommended.
Pre-press at full press temperature for 2-3 seconds and wash inside out at least 24 hours after pressing.
| Mirror subject | Yes |
|---|---|
| Pressing temperature | 150 °C |
| Pressing time | 15 seconds |
| Contact pressure | Medium, 2,5 - 3,0 Bar |
| Pull off the backing material | Warm |
| Washable up to | 60 °C, no softener, do not tumble dry |
| Knife / Tool | 45° | Cricut: Premium-Feinschnittklinge | Cameo: Autoblade | Juliet: 45° |
| Knife pressure | 80 g | Cricut: - | Cameo: 6 | Juliet 5-10 |
| Preset | Cricut: Heat Transfer (Non-Cricut) | Cameo: Heat Transfer Smooth |
Always carry out application tests on the original material.