Product information


Subli-Print® Round Glass Coasters

Round sublimation coasters made of glass with a diameter of approx. 100 mm.

The Subli-Print® Glass Coasters are supplied with self-adhesive rubber studs. The white coated reverse side is the print side.

We recommend hand rinsing.


The following information is intended as a guide and may vary due to tolerances (material properties, sublimation inks and paper, substrate and ambient temperature, etc.). We recommend storing the items to be sublimated at room temperature for at least 24 hours before processing.

Mirror subject No
Pressing temperature 190 °C
Pressing time 120 seconds
Contact pressure Low, 2,0 Bar
Notice Print on rear side

Always carry out application tests on the original material.