Product information

Subli-Print

Subli-Print® MDF Key Ring Shirt

Sublimation key ring shaped as a jersey or shirt made of sturdy, 3 mm thick MDF material. The Subli-Print® MDF key ring can be printed on both sides, size of the print area approx. 56 x 56 mm.

The sublimation surface is provided with a protective film, which must be removed before printing.

The supplied ring is mounted after printing.

Instructions

The following information is intended as a guide and may vary due to tolerances (material properties, sublimation inks and paper, substrate and ambient temperature, etc.). We recommend storing the items to be sublimated at room temperature for at least 24 hours before processing.

Mirror subject Yes
Pressing temperature 185 °C
Pressing time 55 seconds
Contact pressure Medium, 2,5 - 3,0 Bar

Always carry out application tests on the original material.