NEW
Subli-Print® Thermo-Tumbler To-Go with Straw
Tested for harmful substances by the TÜV Rheinland
Product number:
TGT
Product information
Subli-Print® Stainless Steel Thermo-Tumbler To-Go with Straw 17 oz
The Subli-Print® Stainless Steel Thermo-Tumbler To-Go is a large, double-walled sublimation mug with lid. The lid has a screw cap and opening for a stainless steel straw.
A matching stainless steel drinking straw and a cleaning brush are included!
- Capacity approx. 500 ml
- Diameter at the bottom approx. 68 mm
- Diameter at top approx. 93 mm
- Height with lid approx. 180 mm
We recommend hand rinsing.
Instructions
The following information is intended as a guide and may vary due to tolerances (material properties, sublimation inks and paper, substrate and ambient temperature, etc.). We recommend storing the items to be sublimated at room temperature for at least 24 hours before processing.
| Mirror subject | Yes |
|---|---|
| Pressing temperature | 180 °C |
| Pressing time | 60 + 40 seconds |
| Contact pressure | Medium, 2,5 - 3,5 Bar |
| Notice | Rotate after 60 seconds and press for a further 40 seconds |
Always carry out application tests on the original material.