Product information


POLI-FLEX® 4882 Reflex Nylon Flex Film

The retroreflective POLI-FLEX® Reflex Nylon is an approx. 180 µ thick fabric with metallised micro glass beads.

The photometric values of POLI-FLEX® Reflex Nylon comply with the EN 471 standard (class 2).


The following information is intended as a guide and may vary due to tolerances (material properties, blade wear, etc.). A test cut is required at each roll change and wash tests are recommended.

Pre-press at full press temperature for 2-3 seconds and wash inside out at least 24 hours after pressing.

Mirror subject Yes
Pressing temperature 150 °C
Pressing time 4 seconds
Contact pressure Medium, 2,5 - 3,5 Bar
Pull off the backing material Warm
Washable up to 40 °C, no softener, do not tumble dry
Knife / Tool 45° | Cricut: Premium Fine Point | Cameo: Autoblade | Juliet: 45°
Knife pressure 120 g | Cricut: - | Cameo: 6 | Juliet: 5-10
Preset Cricut: Heat Transfer (Non-Cricut) | Cameo: Heat Transfer Smooth
Notice Press for 10 seconds after peeling carrier

Always carry out application tests on the original material.