POLI-FLEX® Printable 4015 PU
Solvent Flex semi-matt
Product information
POLI-FLEX® Printable 4015 PU
POLI-FLEX® Printable 4015 PU is a white printable polyurethane flex film with a thickness of 100 µ and a semi-matt finish. The solvent flex film is suitable for transfer onto light and dark textiles. Printable 4015 has very good cutting properties and a brilliant print result.
POLI-FLEX® Printable 4015 PU is equipped with a PET liner and can be printed with solvent and eco-solvent inks.
Instructions
The following information is intended as a guide and may vary due to tolerances (material properties, blade wear, etc.). A test cut is required at each roll change and wash tests are recommended.
Pre-press at full press temperature for 2-3 seconds and wash inside out at least 24 hours after pressing.
| Mirror subject | No |
|---|---|
| Pressing temperature | 160 °C |
| Pressing time | 15 seconds |
| Contact pressure | Medium, 2,5 - 3,0 Bar |
| Pull off the backing material | Warm |
| Washable up to | 40 °C, no softener, do not tumble dry |
| Knife / Tool | 45° | Cricut: Premium Fine Point | Cameo: Autoblade | Juliet: 45° |
| Knife pressure | 80 g | Cricut: - | Cameo: 6 | Juliet: 5-10 |
| Preset | Cricut: Heat Transfer (Non-Cricut) | Cameo: Heat Transfer Smooth |
| Notice | To transfer the print onto the textile we recommend the heat resistant application tape POLI-TACK 854. |
Always carry out application tests on the original material.