POLI-FLEX® Printable 4675
Sublimation Fabric
Product information
POLI-FLEX® Printable 4675
POLI-FLEX® Printable 4675 is a white polyester fabric of approx. 200 µ, specially developed for sublimation printing. Due to the silicone paper backing, the images can be cut with a plotter after printing. The fabric can be easily weeded and the homogeneous surface gives a print result with strong and brilliant colours.
POLI-FLEX® Printable 4675 can be washed at up to 90 °C, making it ideal for heavy-duty textiles and workwear.
Instructions
The following information is intended as a guide and may vary due to tolerances (material properties, blade wear, etc.). A test cut is required at each roll change and wash tests are recommended.
Pre-press at full press temperature for 2-3 seconds and wash inside out at least 24 hours after pressing.
To prevent fraying of the edges, please hem the design.
| Mirror subject | No |
|---|---|
| Pressing temperature | 160 °C |
| Pressing time | 15 seconds |
| Contact pressure | Medium, 2,5 - 3,0 Bar |
| Pull off the backing material | Warm |
| Washable up to | 90 °C, no softener, do not tumble dry |
| Knife / Tool | 45° | Cricut: Premium Fine Point | Cameo: Autoblade | Juliet: 45° |
| Knife pressure | 80 g | Cricut: - | Cameo: 6 | Juliet: 5-10 |
| Preset | Cricut: Heat Transfer (Non-Cricut) | Cameo: Heat Transfer Smooth |
| Notice | Printing: Indirect using sublimation paper |
Always carry out application tests on the original material.