Siser® Brick 600 Dual Colors Flexfolie
600 micron matte flex film – bold designs with character
Product information
Siser® Brick 600 Dual Colors – Two-Tone 3D Heat Transfer Vinyl for Maximum Impact
More Depth, More Contrast, More Wow Effect
With Brick 600 Dual Colors, take your textile decoration to the next level. This innovative two-tone version of the Brick 600 line delivers the same premium thickness, durability, and easy application – with an added advantage. The base and top layers come in different colors, creating a clean contrast edge during cutting and weeding. The result is a striking 3D effect with impressive depth that makes logos, lettering, and graphics instantly stand out.
Perfect for fashion, streetwear, merchandising, and any application where dimensional visibility and premium detail are essential.
Certified, Safe and Responsibly Produced
- REACH compliant
- OEKO-TEX® Standard 100 certified (Class II)
- VeganOK certified
Instructions
The following information is intended as a guide and may vary due to tolerances (material properties, blade wear, etc.). A test cut is required at each roll change and wash tests are recommended.
Pre-press at full press temperature for 2-3 seconds and wash inside out at least 24 hours after pressing.
| Mirror subject | Yes |
|---|---|
| Pressing temperature | 155 °C |
| Pressing time | 25 seconds |
| Contact pressure | High, 3 - 4 Bar |
| Pull off the backing material | cold |
| Washable up to | 40 °C, no softener, do not tumble dry |
| Knife / Tool | 45° | Cricut: Premium Fine Point | Cameo: Autoblade | Juliet: 45° |
| Knife pressure | 170 g | Cricut: - | Cameo: 20 | Juliet: 15-20 |
| Preset | Cricut: Card Stock | Cameo: Heat Transfer Smooth |
Always carry out application tests on the original material.