Product information


Siser® Colorprint Extra Flex

Siser® Colorprint Extra is a printable, glossy PVC flex film for textile decorations on nylon fabrics and polyamide. The film is opaque with a material thickness of 150 µ and has a high colour brilliance and very good colour stability.

Siser® Colorprint Extra is not suitable for textiles that tend to resublimate.


The following information is intended as a guide and may vary due to tolerances (material properties, blade wear, etc.). A test cut is required at each roll change and wash tests are recommended.

Pre-press at full press temperature for 2-3 seconds and wash inside out at least 24 hours after pressing.

Mirror subject No
Pressing temperature 165 °C
Pressing time 15 seconds
Contact pressure Medium, 2,5 - 3,0 Bar
Pull off the backing material Warm, we recommend Siser T.T.D. Easy
Washable up to 40 °C, no softener, do not tumble dry
Knife / Tool 45° | Cricut: Premium Fine Point | Cameo: Autoblade | Juliet: 45°
Knife pressure 90 g | Cricut: - | Cameo: 6 | Juliet: 5-10
Preset Cricut: Heat Transfer (Non-Cricut) | Cameo: Heat Transfer Smooth
Notice Tinten-Kompatibilität: ECO-SOL MAX | ECO-SOL MAX 3 |TrueVIS 2 | EUV | EUV-2 | EUV5 | SS21 | UV LUS 170 | Latex 1xx - 3xx | Latex 5xx

Always carry out application tests on the original material.