Product information


Siser® Colorprint PU

Thin and flexible - Siser® Colorprint PU is an 80 µ printable flex film and is suitable for transfer onto cotton, polyester and polyester cotton blends.

The solvent flex film has very good wash resistance up to 60°C.


The following information is intended as a guide and may vary due to tolerances (material properties, blade wear, etc.). A test cut is required at each roll change and wash tests are recommended.

Pre-press at full press temperature for 2-3 seconds and wash inside out at least 24 hours after pressing.

Mirror subject No
Pressing temperature 155 °C
Pressing time 15 seconds
Contact pressure Medium, 2,5 - 3,0 Bar
Pull off the backing material Warm, we recommend Siser T.T.D. Easy
Washable up to 60 °C, no softener, do not tumble dry
Knife / Tool 45° | Cricut: Premium Fine Point | Cameo: Autoblade | Juliet: 45°
Knife pressure 90 g | Cricut: - | Cameo: 6 | Juliet: 5-10
Preset Cricut: Heat Transfer (Non-Cricut) | Cameo: Heat Transfer Smooth
Notice Ink-compatability: ECO-SOL MAX | ECO-SOL MAX 3 | TrueVIS | TrueVIS 2 | EUV | EUV-2 | EUV5 | EUV-S |SS21 |BS3 |BS4 |Latex 1xx - 3xx | Latex 5xx | Latex 7xx – 8xx

Always carry out application tests on the original material.