Siser® Hi-5 Print – Printable Flex Film for Fast Processing
Solvent Flex vivid | matt
Product information
Siser Hi-5 Print
Siser® Hi-5 Print is the ideal printable flex film for exceptionally fast and efficient processing. With an ultra-short press time of just 5 seconds at a low application temperature, it helps you save valuable time – perfect for high production speeds.
With a thickness of 85 microns, the film offers a comfortable feel and delivers outstanding print results. Available in a matte finish or as a glossy Vivid version for especially brilliant designs.
Suitable for application on textiles such as cotton, polyester/cotton blends, and polyester/acrylic fabrics.
Instructions
The following information is intended as a guide and may vary due to tolerances (material properties, blade wear, etc.). A test cut is required at each roll change and wash tests are recommended.
Pre-press at full press temperature for 2-3 seconds and wash inside out at least 24 hours after pressing.
| Mirror subject | No |
|---|---|
| Pressing temperature | 120 °C for textiles < 150 g/m² | 150 °C for textiles > 150 g/m² |
| Pressing time | 5 seconds |
| Contact pressure | Medium, 2,5 - 3,0 Bar |
| Pull off the backing material | Warm, we recommend Siser T.T.D. Easy |
| Washable up to | 60 °C, no softener, do not tumble dry |
| Knife / Tool | 45° | Cricut: Premium Fine Point | Cameo: Autoblade | Juliet: 45° |
| Knife pressure | 90 g | Cricut: - | Cameo: 6 | Juliet: 5-10 |
| Preset | Cricut: Heat Transfer (Non-Cricut) | Cameo: Heat Transfer Smooth |
| Notice | Ink-compatability: ECO-SOL MAX | ECO-SOL MAX 3 | TrueVIS | TrueVIS 2 |EUV5 | EUV-S | SS21 | BS3 | BS4 | Latex 1xx - 3xx | Latex 5xx | Latex 7xx – 8xx |
Always carry out application tests on the original material.