Siser Holographic Flex Film
Holographic flex film
Product number:
HOLOGRAPHIC
Product information
Siser® Holographic Flex Film
Siser® Holographic is a polyester flex film with metallic holographic effects. The 210 µ film has an adhesive backing.
Please note that polyester flex films are not suitable for small or fine details and are not durable for a large amount of washing cycles.
Instructions
The following information is intended as a guide and may vary due to tolerances (material properties, blade wear, etc.). A test cut is required at each roll change and wash tests are recommended.
Pre-press at full press temperature for 2-3 seconds and wash inside out at least 24 hours after pressing.
| Mirror subject | Ja |
|---|---|
| Pressing temperature | 155 °C |
| Pressing time | 15 seconds |
| Contact pressure | Medium, 2,5 - 3,5 Bar |
| Pull off the backing material | Cold |
| Washable up to | 60 °C, no softener, do not tumble dry |
| Knife / Tool | 45° | Cricut: Premium Fine Point | Cameo: Autoblade | Juliet: 45° |
| Knife pressure | 130 g | Cricut: - | Cameo: 14 | Juliet: 25-30 |
| Preset | Cricut: Heat Transfer (Non-Cricut) | Cameo: Heat Transfer Smooth |
Always carry out application tests on the original material.