Product information


Siser® Jetflock Solvent

Siser® Jetflock Solvent is a printable flock film with paper liner, suitable for solvent and eco-solvent inks. Siser® Jetflock Solvent offers excellent ink adhesion and opacity. The material thickness is approx. 450 µ.

Siser® Jetflock Solvent is transferred without transfer tape and is therefore only suitable for patches and continuous motifs. Cover with siliconised paper when pressing.


The following information is intended as a guide and may vary due to tolerances (material properties, blade wear, etc.). A test cut is required at each roll change and wash tests are recommended.

Pre-press at full press temperature for 2-3 seconds and wash inside out at least 24 hours after pressing.

Mirror subject No
Pressing temperature 180 °C
Pressing time 15 seconds
Contact pressure Medium, 2,5 - 3,0 Bar
Washable up to 60 °C, no softener, do not tumble dry
Notice Print non-mirrored, let the print dry thoroughly (approx. 24 hours) before further processing. Cover your print with a siliconised paper whilst pressing.

Always carry out application tests on the original material.