Siser® Vernice Flex Film
Flex film with lacquer surface
Product number:
VERNICE
Product information
Siser® Vernice Flex Film
Siser® Vernice is a PVC-free effect flex film with a glossy lacquer surface, ideal for fashionable designs as well as elegant tone-in-tone designs.
The film is comfortable to wear and has a thickness of approximately 90 µ. The liner is non-adhesive.
Instructions
The following information is intended as a guide and may vary due to tolerances (material properties, blade wear, etc.). A test cut is required at each roll change and wash tests are recommended.
Pre-press at full press temperature for 2-3 seconds and wash inside out at least 24 hours after pressing.
| Mirror subject | Yes |
|---|---|
| Pressing temperature | 150 °C |
| Pressing time | 8 seconds |
| Contact pressure | Medium, 2,5 - 3,5 Bar |
| Pull off the backing material | Cold |
| Washable up to | 30 °C, no softener, do not tumble dry |
| Knife / Tool | 45° | Cricut: Premium Fine Point | Cameo: Autoblade | Juliet: 45° |
| Knife pressure | 80 g | Cricut: - | Cameo: 6 | Juliet: 5-10 |
| Preset | Cricut: Heat Transfer (Non-Cricut) | Cameo: Heat Transfer Smooth |
Always carry out application tests on the original material.